How to measure an angle on your screen with an online protractor

Measure any angle in a photo, a diagram or an object held to the screen: why an online protractor needs no calibration, how to line it up, read both scales and get angles over 180°.

By Swapnil Gupta · · 3 min read

An online protractor measures an angle on your screen: in a photo, a diagram, a design, or a small object held against the glass. Unlike an online ruler, it needs no calibration, and it reads more precisely than most plastic protractors.

Why it needs no calibration#

A ruler on a screen has to know how big a millimetre is there, and every screen differs. An angle does not change with size: 45° is 45° on a phone and on a projector. So a protractor is right on any screen and at any zoom, the moment it opens.

Measure an angle#

  1. Open the online protractor.
  2. Line up the corner of the angle with the protractor's centre, the dot on its baseline. Scroll the page, or move the picture or object, until they meet.
  3. Drag the first red handle along one side of the angle.
  4. Drag the second handle along the other side.
  5. Read the angle between the arms at the top.

For fine work, click a handle and use the arrow keys: one degree a press, ten with Shift, and a tenth of a degree with Alt.

Reading the two scales#

Like a paper protractor, it has two rows of numbers. The outer row counts from 0 on the right, the inner row from 0 on the left. On paper the rule is to read the scale that starts at 0 on the arm you lined up first. Here you can skip that: the number at the top is the angle between the arms, whichever way round they are.

Angles over 180°#

Two lines make two angles: the one between them and the one around the outside. Beside the angle, the protractor shows the other way round, 360° minus the first. If you need the reflex angle, of a pie chart slice or a turn, read that one.

Tips for a good reading#

  • Use long arms. Line each arm up along as much of its side as you can see: a small error over a long line is a smaller error in degrees.
  • Zoom in on the picture, not the protractor. A larger picture makes the lines easier to follow; the angle does not change.
  • Use the keys for the last degree. Dragging gets close; the arrow keys with Alt finish the job.

Checking angles in a web design?#

If the angle is in a web page you are building, a rotated card or a skewed banner, Nitpique reads it straight from the CSS: it outlines rotated, scaled and skewed elements on their real shape with their angle in the label. See true geometry for transformed elements.

Read next